Behmor Brazen plus 3.0 - Brewer
Behmor Brazen Plus 3.0
These are currently in stock and will be shipped directly from our supplier as soon as possible after purchase (usually same or next day).
The latest Brazen Plus 3.0 version has new programming for better extraction with revised pulse water release timing. This 230-volt model is specially built and electrically certified for Australia.
More like an "electronic pour over" than those old-style dripolators, the Brazen Plus 3.0 has all the features and pinpoint accuracy to produce an outstanding brew every time. The water is heated in the top and only released when the temperature reaches the set point. The internal thermostat then continues to hold the water at the same temperature throughout the whole brewing process to yield an excellent and repeatable coffee.
Don't confuse this with the 1980's style brewers that have to overheat the water to make it rise to the coffee which then scolds the grounds before leaving it on a heated pad to stew the coffee for hours (YUCK).
Holds 1.2 Litres of water
Adjustable temperature control to 1 degree.
Programmable pre-soak to let the coffee bloom.
Pulse water delivery with thermal accuracy throughout.
A stainless, insulated thermal carafe
Altitude calibration to ensure accuracy.
Inbuilt timer, set at night and wake up to great coffee.
Take your brew to a new level with this small footprint,
low-cost machine. Perfect for home, office and business.
FREE shipping anywhere in Australia
Variable Temperature Controls - Set the Brazen to brew between 90 and 99 degrees Celcius in 1 degree increments. This puts you in control of the brewing temperature and you may discover that a particular temperature produces the flavour profile you like best, for a particular coffee. As the heating water comes within a few degrees of its target temperature, it will slowly glide to it so as not to overshoot, then begin brewing (Power Controlled Temperature Glide).
Ideal Coffee Extraction - Coffee grounds are fully saturated due to an oversized spray head and improved pulsing of the water flow.
Pre-Soak Function with Time Setting - Adjustable from 15 seconds to 4 minutes in 1 second increments. When coffee is very fresh it contains naturally occurring gases that need to be released. The preferred way to brew drip coffee, whether done manually by the cup, or, in a high end larger commercial brewer, is to put a small amount of heated water on the ground coffee to saturate it. The fresh coffee "blooms" and this short period of time allows the gases to release. The fresher the coffee the longer the pre-soak required. Pre-soaking assures you of full saturation and will reduce the possibility that coffee will overflow a brew basket (if ground properly). In the Brazen 150ml of heated water is sprayed on to the coffee bed, which takes about 15 seconds. The rest of the pre-soak time setting is for degassing and saturation. The remaining brew cycle continues immediately following. We generally set pre-soak for 1 minute, but a little longer for coffee right out of the roaster (another Behmor product).
Gold filter included - A custom made, basket shaped gold filter with handle is included, which is a very unusual value added feature. The Brazen can also use basket shaped paper filters which are readily available. Do not use both at the same time.
Sleep mode - display saves power when now in use.
Auto Timer / Clock / Memory - You can program the Brazen to brew at a preset time, like when you wake up in the morning. All of the programming is saved to memory except for the clock itself.